Lamp Shade Fitting

Live Shade Fitting, Call during hours, Email after hours (We answer 1st thing next morning)
If you know the shade size needed: Email the measurements: (top-bottom-side) and the answers to 1 & 6 below.
If you do not know the shade size needed: Email answers 1-7 and allow us 15 minutes to fit one of our lamps similar to yours.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1) BRIEF DESCRIPTION of the lamp: floor lamp, table lamp, hanging lamp, wall lamp, color, porcelain, brass, metal
2) NUMBER of LIGHT BULBS
3) LAMP HEIGHT FOR SINGLE BULB LAMPS: Measure from TOP of the socket where the light bulb screws in - to bottom of lamp base
    LAMP HEIGHT FOR MULTIPLE BULB LAMPS: Measure from TOP of the body (where the sockets join together) - to bottom of lamp base.
    LAMP HEIGHT FOR GLASS REFLECTOR BOWL LAMPS: Measure from TOP of glass - to bottom of lamp base.
    (If your lamp has a different bulb configuration (candelabra, etc., email a photo or description and we will ask the appropriate questions.)
4) BASE width across very bottom of the lamp base
5) BODY width at widest portion of the lamp body excluding the base
6) SHADE STYLE PREFERENCE - So I do not waste time suggesting a shade outside your interest. (Tall Drum, Short Drum, Coolie, Pleated, Mica, Square, Oval..
7) 1 PHOTO is helpful but not necessary - 1 photo showing the entire lamp.
------------------------------------------------------
Lamp shade measurements ae listed: TOP x BOTTOM x SIDE
LAMP SHADE SIZE (Top - Bottom - Side), Shade to left measures 9-14-7
Rectangle and oval lamp shades have 5 measurements: 2 top, 2 bottom, 1 side (Top - Bottom - Side) i.e.  7/9 - 11/16 - 12
---------------------------------------------------------------------------------------------
Lamp measurements
Lamp Measurements and Components
 
1) Initially, forget the harp or shade holder pipe, also forget the shade spider drop/recess as we address these issues last.
2) Concentrate only on getting the correct shade size and style. Otherwise shade fitting will be mission impossible.
3) Simply order the harp or shade holder pipe. We fit your shade with the correct size to position the bottom 1-2" below the electrical socket. 
We professionally determine the proper shade fit and harp (or shade holder pipe) for any lamp and any shade.
Our business is built on old fashioned person to person service.
We help our internet customers just like our walk in customers.

-------------------------------
Lamp shade spider is the top wire assembly of the lamp shade which attaches to or sits upon the lamp base
LAMP SHADE SPIDER = top "spokes" and "washer" fitter found on our lamp shades unless noted otherwise.
SPIDER DROP/RECESS = Vertical distance from the shade top rim to the spider washer.
---------------
Shade Riser - 1" or 2" high - Screws onto a Harp (above) to quickly raise (lower) a lamp shade.
Shade Riser - 1" or 2" high - Screws onto a Harp (above) to quickly raise (lower) a lamp shade.
------------------------------
Reflector glass torchiere shade Reflector Glass Ring (3 sizes: 6", 8", 10" wide) Fits on top of white reflector glass photo below.
Combine with a riser (photo above) to raise the shade to proper vertical height. Ring goes on top of the glass, then the risers, then the shade, then the finial.
------------------
 Clip on adapter
STANDARD CLIP ADAPTER (standard bulb) - Attaches to any of our lamp shades. Make any lamp shade clip onto a light bulb by using the STANDARD CLIP ADAPTER. This clip adapter positions the shade about 1.5" higher than the flush clip adapter.
------------------
Flush clip on shade adapter
FLUSH CLIP ADAPTER (standard bulb) - Attaches to any of our lamp shades. Make any lamp shade clip onto a light bulb by using the FLUSH CLIP ADAPTER. This clip adapter positions the shade about 1.5" lower than the standard clip adapter.
--------------
Candelabra chandelier bulb clip on adapter CANDELABRA CLIP ADAPTER (chandelier bulb) - Attaches to any lamp shade.
Makes any lamp shade clip onto a candelabra (chandelier) light bulb.
-----------------------------
Uno lamp shade
UNO (threaded) LAMP SHADES have larger threaded fitters that screw onto the electrical socket on antique bridge arm floor lamps and others.
Shop UNO LAMP SHADES HERE,
SLIP UNO LAMP SHADES - Slip Over The Electrical Socket: Many imported lamps from big box stores (such as Crate & Barrel, Pottery Barn, etc.) have SLIP UNO FITTER LAMP SHADES. The center hole fitter is about 1 5/8" wide and slips directly over the electrical socket to hold the lamp shade onto the lamp. We now offer CUSTOM LAMP SHADES WITH SLIP UNO FITTERS - ask.
--------------------------------------------------

Correct shade size fitting for a candelabra lampSHADE SIZE FOR CANDELABRA STYLE LAMP shade fitting size

We are very familiar with fitting candelabra lamps. We need specific information in order to get a correct fit.

1) VERTICAL HEIGHT TO THE TOP OF THE MIDDLE SOCKET (if there is one) - (Measured to where the light bulb screws in).
2) VERTICAL HEIGHT TO THE TOP OF ANY OUTER CANDELABRA SOCKET - (Measured to where the light bulb screws in).
3) WIDTH DIAGONALLY ACROSS TWO OF THE OPPOSITE CANDELABRA SOCKETS - SEE THE RED LINE IN THE PHOTO ABOVE. THE 4 BLACK CIRCLES REPRESENT THE 4 OUTER CANDELABRA SOCKETS. WE NEED THE MEASUREMENT OF THE RED LINE.
4) WIDTH ACROSS THE VERY BOTTOM OF THE LAMP BASE.
5) SHADE STYLE PREFERENCE - Narrow your selection to a particular style so I do not waste time suggesting a shade outside your interest. (i.e. Drum, Coolie, Pleated, Mica, Square, Metal ... etc.)
6) When you call us to order tell us if your lamp has a HARP or SHADE HOLDER PIPE and ORDER ONE. We will send the correct size guaranteed.

Buy With Confidence - 100 % Satisfaction Guaranteed - Live Help with Shade Size Fitting, Email or call us